Concrete Work Granbury, Leander & Across Texas
Slabs, driveways, shop floors and flatwork — poured on ground we prepped ourselves.
Concrete Starts With the Dirt Under It
Most concrete that cracks and heaves in Texas fails because of what's underneath it. Because we do the dirt work too, we control the base: the subgrade is cut to the right depth, compacted, and graded to drain before any forms go in. That's the difference between a slab that stays flat and one that's cracked by the second summer.
Doing the site work and the concrete with one outfit also means one schedule and one person responsible, instead of the dirt crew blaming the concrete crew.
Driveways, Floors and Flatwork
We pour concrete driveways and aprons, shop and barn floors, sidewalks and patios, equipment pads, and approaches. On ranch and acreage jobs, that often means a shop slab on a pad we just built, or a concrete apron where a gravel drive meets the road.
Tell us what the concrete needs to carry — trucks, equipment, a shop lift — and we'll size the thickness and reinforcement to the job. We also slope every slab so water runs off it and away from the building, instead of pooling against a wall or a door.
What's Included
- Concrete driveways and aprons
- Shop and barn floors
- Slabs on prepared pads
- Sidewalks and patios
- Equipment and tank pads
- Subgrade prep and compaction
- Forming and reinforcement
- Drainage around the slab
How It Works
Talk through the job
Size, use and what the slab has to carry — we look at the site and the ground.
Prep the base
We cut, compact and grade the subgrade so the concrete sits on solid ground.
Form and pour
We form, reinforce and pour, and finish it for the use it'll get.
How we quote: every property is different, so every job is quoted after we look at the land — the brush, the soil, the slope and what you want done. The quote is free, and the scope we agree on is the scope we do. Call (254) 248-7272 to set up a visit.
Frequently Asked Questions
Do you do the dirt work and the concrete?
Yes. We prep the subgrade and pour the concrete, so the base and the slab are built by the same crew.
How thick should my driveway or shop floor be?
It depends on what it carries. A car driveway and a shop floor under equipment need different thickness and reinforcement. We'll size it to the use.
Can you pour a slab on a new pad?
Yes — that's one of our most common jobs: build the pad, let it set up, then pour the slab.
From shop floors near Granbury to driveways outside North Austin, call and tell us what you need poured. Call (254) 248-7272 or request a free quote.
Got Land That Needs Work?
Clearing, ponds, tanks, pads or roads — call and tell us what you've got. Straight answers, no runaround.